Saniflo Saniaccess 2 Upflush Macerator Pump

The Saniaccess2 is a 1/2 HP pump system used to install a half-bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack. It incorporates a macerating system which can handle human waste and toilet paper in residential applications. The blade is made out of a hardened stainless steel material which eliminates the need for any service or replacement.

*Discharges the waste through a 3⁄4" or 1" rigid pipe. A non-return valve is included on the discharge elbow assembly provided with the system. This elbow can be rotated 360 degrees depending on the discharge installation.

* Has been designed with a 1 1⁄2" vent connection on the side of the pump housing. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent as air needs to freely flow both ways. Note: The use of mechanical vents, air admittance valves or similar devices is not permitted.

* Must be connected to Saniflo’s 1.28 GPF rear discharge toilet. These toilets come in round and elongated (ADA compliant) models.

* Will also discharge gray water from a sink. The wastewater will drain into the system via a 11⁄2" inlet which is located on the side of the pump housing. Note that either side connection can be used for the vent or as an inlet.

* Designed with two easy access service panels located on top of the pump. On one side of the pump you can easily access the electrical components and the level sensor. The other side allows access to the macerating blade for easy removal of foreign objects.

The Saniaccess2 has been certified to American and Canadian Standards.  Macerating standard; US: CSA Certified & IAPMO (UPC) listed - ASME A112.3.4, CA: Macerating Standard CSA B45.9. 

Download the Saniflo Saniaccess 2 Manual Here:  Saniaccess 2 Manual

All items may be purchased separately.  However, the Saniaccess2 works as a system and therefore a toilet bowl (083 or 087), toilet tank (005) and the macerating unit (081) need to be purchased.  An optional extension pipe (030) is available for the pump to be installed behind the wall.